In everyday life even very sociable people need privacy. It is possible to achieve it by means of installation of interroom doors. Best of all the cloths made of tree look. With their help it is possible to give cosiness to interior, to make the apartment softer and warm. It is necessary only to put timber door correctly.
Instruction
1. Of course, in the beginning it is necessary to carry out preparatory work. After that accurately insert door case into door opening and check whether it is possible to close door. If everything is good, arrange wedges struts. One of them has to be level with the top loop, and another – is slightly lower than the door handle. It is necessary in order that the door was fixed in intermediate position, but did not slam and did not open wide open.
2. Clean wall, get rid of dust. Take polyurethane foam and fill the aperture formed between wall and door case. This construction material will serve as heat insulator. Let's polyurethane foam dry. For this purpose wait 10-12 hours which can be spent for installation of platbands.
3. Of course, it is better not to hurry and postpone work on installation of door for several hours anywhere. The fact is that it is only better to carry out adjustment and cutting of platbands after the door case has taken the lawful place, and polyurethane foam has dried. To establish platbands, apply them to door and make the necessary mark.
4. Cut off necessary piece at an angle in 45 degrees. Do similar actions with other platbands.
5. Take special nails just for decoration which will allow to keep esthetic type of your door, and fix platbands. For this purpose in platband drill openings which length corresponds to the chosen nails. At the same time try to be limited with a diameter of 1.5 mm. Remember that at the correct installation the platband does not prevent to open and close door.
6. Thus, you with ease can do without the help of the professional. The only thing that is required to you – qualitative building materials and tools.